- Contact Person : Ms. Wang Jiarui
- Company Name : Yingkou Changsheng Steel Structure Project Co., Ltd.
- Tel : 86-0417-2897788
- Fax : 86-0417-4848122
- Address : Liaoning,Yingkou,No. 22, Xiangyanglouli, Gongye Street, Zhanqian District
- Country/Region : China
- Zip : 115000
CS Polyurethane Spray and Perfusion Foam Equipment
CS PU foam series be widely used in different kinds of areas such as refrigerator warehouse heat preservation, building external wall, roof water-proof and heat preservation, gymnasium, motorcar and ship, air conditioner adiabatic, and solar water heater and so on.
CS PU foam machine GEN I
Standard Configuration
Mainframe: 1 set
Spray gun: 1 set
Heating and preserved pipe: 15m
Connecting pipe for spray gun: 1.5m
Transfer pump: 2 sets
Technical Parameter:
Academic max. output of material pump:9.5kg/min(21b./min)
At operating pressure material output: 4~8kg/min
The highest heating temperature: 80°C
Heating device power for material: 3000w x2(or 4500w x2optional)
Heating power for pipe heating preservation: 3500w
Single material output output pressure:11Mpa(1600psi)
Max. Pipe length: 90m(300Ft)
The highest heating temperature: 80°C
Air source requirements: 0.9m3/min 0.7Mpa(33cfm,100psi)
Electrical requirements: 3-phase, 4-line 380v, 50/60Hz, 9Ax3+15A
CS PU foam machine GENS II
Standard Configuration
Mainframe: 1 set
Spray gun: 1 set
Heating and preserved pipe: 15m
Connecting pipe for spray gun: 1.5m
Max.Pipe length:45m
Transfer pump: 2 sets
Technical Parameter:
Electrical source: 220v 7000w
Air source:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min
Output: 4~8kgsmin
Heating device power for material: 2500w ×2
Heating power for pipe heating: 2000w
Single component output pressure: 5~10Mpa (700~1500psi)
CS PU foam machine GEN III
Standard Configuration
Mainframe: 1 set
Spray gun: 1 set
Heating and preserved pipe: 15m
Connecting pipe for spray gun: 1.5m
Transfer pump: 2 sets
Technical Parameter:
Electrical source: 220v 7000w
Air source:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min
Output: 2~6.8kg/min
Heating device power for material: 2500w ×2
Heating power for pipe heating: 2000w
Single component output pressure: 5~10Mpa (700~1500psi)
The range of the ratio: 1:1~2:1
CS Polyurethane Spray and Perfusion Foam Equipment
